Quantcast Hub and Drum Assembly (XM1063 Only)

Custom Search
 
  
 


TM 9-2330-380-14&P
4-52. Hub and Drum Assembly (XM1063 Only)
This task covers:
a. Removal
b. Cleaningandinspection
c. Installationandadjustmentofwheelbearings
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
General mechanic's tool kit (item 01, Appendix B)
Wheels removed (para. 3-4).
Automotive shop set (item2, Appendix B)
Brakes caged (para. 2-27).
Wheel bearing wrench (item 3, Appendix B)
Jack stand in place under axle.
Materials/Supplies:
Dry cleaning solvent (item 3, Appendix E)
Brush (item 15, Appendix E)
Grease (item 5, Appendix E)
a. Removal
1. Remove three screws (1) and brake drum (2).
2. Remove six screws (13), washers (14), hub cap (15) and gasket (16). Discard gasket.
3. Remove 3-1/4 inch outer bearing nut (12), keyed washer (11) and 3-7/8 inch inner nut (10).
4. Remove outer bearing cone (9) and hub (4).
5. Remove oil seal (7), inner bearing cone (8), inner bearing cup (6) and outer bearing cup (3).
6. Remove serrated bolts (5), if defective.



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.