| Tweet |
Custom Search
|
|
|
|||||
|
|||||
 TM 9-2330-380-14&P
5-10. Rubber Pad
This task covers:
a. Removal
b. Inspection
c. Installation
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
General Mechanic's Tool Kit (item 1, Appendix B)
Wheels Removed (para. 3-4)
Automotive Shop Set (item 2, Appendix B)
Materials/Supplies:
a. Removal
1. Remove four nuts (6) and eight washers(7)
securing two axle U-bolts (8).
2. Remove four nuts (3), washers (2) and screws (1)
securing end cap (4).
3. Remove end cap and rubber pads (5).
b. Inspection
Inspect rubber pads for excessive wear and deterioration. Replace defective pads.
c. Installation
1. Position end cap (4).
2. Secure end cap with four screws (1), washers (2) and nuts (3). Tighten nuts to a torque of 180 lb-
ft (244.0 Nm) dry or 130 lb-ft (176.3 Nm) lube.
3. Install axle U-bolts (8) and secure with four nuts (6) and eight washers (7). Tighten nuts to a torque of
300 lb-ft (406.8 Nm) dry or 220 lb-ft (298.3 Nm) lube.
Follow-on maintenance:
Install wheels (para. 3-4)
|
|||||
|
|||||
