| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-380-14&P
Interior Lights (M129A4 Only)
This task covers:
a. Lampreplacement
b. Starter replacement
c. Lightingfixtureremoval
d. Lightingfixtureinstallation
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
General mechanic's tool kit (item 01, Appendix B)
110-volt power source disconnected.
WARNING
Make sure all electrical power is disconnected before performing any maintenance on the electrical
system. Serious injury or death may result if proper precautions are not taken.
8
a. Lamp replacement
6,7
1. Remove four bolts (1) and cover (2).
2. Turn lamp (3) 1/4 turn and pull out.
3. Position new lamp (3). Turn 1/4 turn and
1
5
snap into place.
4. Position cover (2) and secure with four bolts (1).
1
2
1
b. Starter replacement
1. Remove four bolts (1) and cover (2).
2. Push down on starter (4) and turn 1/4 turn.
Remove starter.
3. Position new starter (4). Push down and turn
1/4 turn to secure in place.
4. Position cover (2) and secure with four bolts (1).
3
4
3
c. Lighting fixture removal
1. Tag and disconnect wires (5).
2. Remove four screws (6), lockwashers (7) and lighting fixture (8).
d. Lighting fixture installation
1. Install lighting fixture (8) and four screws (6) and lockwashers (7).
2. Connect wires (5).
Follow-on maintenance: None
|
||
|
||
