Custom Search
 
  
 


TM 9-2330-380-14&P
4-28. Intervehicular Cable Receptacle, 24-Volt
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Installation
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
Power source disconnected.
General mechanic's tool kit (item 01, Appendix B)
Materials/Supplies:
Cleaning compound (item 19, Appendix E)
Rags (item 14, Appendix E)
WARNING
Make sure all electrical power is disconnected before performing any maintenance on the electri-
cal system. Serious injury or death may result if proper precautions are not taken.
a. Removal
1. Make sure power source is disconnected.
2. Remove four nuts (4), washers (3), ground wire (9) and
screws (2) securing receptacle (5) and cover (1) to
resistor box cover assembly.
3. Remove cover (1) and receptacle (5).
4. Remove nut (6) from rear of receptacle (5) and slide nut
back over wires (7).
9



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business