| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0045 00
AIR RESERVOIRS REPLACEMENT - Continued
REMOVAL
1. Remove all fittings (8, 9, and 10), plugs (4) and air release valve (7) from the air reservoir.
2. Remove four locknuts (6), eight washers (3), four hex screws (2), two rubber pads (5), and
air reservoir (1) from mounts. Discard locknuts.
1
2
4
3
2
4
3
5
9
8
5
10
6
3
3
7
6
Figure 1. Air Reservoir
INSTALLATION
1. Install air reservoir (1) to mounts using four hex screws (2), eight washers (3), two rubber
pads (5), and four new locknuts (6).
2. Apply sealing compound (sealant, silicone) to all fittings (8, 9, and 10), plugs (4), and air release valve (7),
and install on air reservior.
0045 00-2
|
||
|
||
