| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0033 00
TAIL LIGHT WIRING HARNESS REPLACEMENT
NOTE
There are two tail light harnesses. Both are removed the same
way. Procedures are for the removal of one harness.
Removal of clearance light mounts are not required for this task.
TAIL LIGHT WIRING HARNESS REMOVAL
1. Disconnect tail light harness (1) from rear wiring harness (2).
2. Remove side clearance lights per WP 0030 00-2.
3. Remove tail light per WP 0028 00-1.
4. Remove tail light wiring harness (1) from frame.
5. Remove and discard grommets as needed.
2
1
Figure 5. Tail Light Wiring Harness
NOTE
See charts in WP 0025 00-3 for details on wiring diagram.
TAIL LIGHT WIRING HARNESS INSTALLATION
1. Install new grommets as needed.
2. Install tail light wiring harness (1) to frame.
3. Install tail light per WP 0028 00-2.
0033 00-5
|
||
|
||
