FRONT CLEARANCE LIGHT WIRING HARNESS REMOVAL

Custom Search

Back
REAR WIRING HARNESS REMOVAL

Up
TM-9-2330-331-14-P Semitrailer Flatbed: Break Bulk/Container Transporter 34 Ton M872A4 (NSN 2330-01-497-0706) (LIN S70159) Manual

TAIL LIGHT WIRING HARNESS REMOVAL

TM 9-2330-331-14&P

0033 00

FRONT CLEARANCE LIGHT WIRING HARNESS REPLACEMENT

FRONT CLEARANCE LIGHT WIRING HARNESS REMOVAL

NOTE

Removal of clearance light mount is not required for this task.

1. Disconnect all front clearance lights from front clearance light wiring harness (1) per WP 0030 00-2.

2. Disconnect front clearance light wiring harness (1) from 12-volt receptacle plug (2).

3. Remove front clearance light wiring harness (1) from frame.

4. Remove and discard damaged grommets as needed.

Figure 4. Front Clearance Light Wiring Harness

NOTE

See charts in WP 0025 00-3 for details on wiring diagram.

FRONT CLEARANCE LIGHT WIRING HARNESS INSTALLATION

1. Install new grommets as needed.

2. Install front clearance light wiring harness (1) to frame.

NOTE

Apply dielectric grease to each plug before connecting to other

cables and harnesses.

3. Connect front clearance light wiring harness (1) to 12-volt receptacle plug (2).

4. Connect and install front clearance lights per WP 0030 00-3.

5. Connect to prime mover and check all lights for proper operation.

0033 00-4