| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0031 00
ABS WARNING LIGHT REPLACEMENT-Continued
REMOVAL
1. Unsnap ABS light (3) from ABS light mount (2).
2. Disconnect wiring harness (1) from ABS light (3).
3. Remove two self-tapping screws (4) and ABS light mount (2). Discard screws.
1
2
3
ABS
4
Figure 1. ABS Warning Light
INSTALLATION
1. Apply antiseize compound to new self-tapping screws. Install ABS light mount (2) and two new
self-tapping screws (4).
2. Apply dielectric grease to wiring harness pins. Connect wiring harness connector (1) to ABS light
mount (2).
3. Snap ABS light (3) into ABS light mount (2).
FOLLOW-ON TASKS
Perform ABS Lights Troubleshooting Proceduers per WP 0012 00-8
END OF WORK PACKAGE
|
||
|
||
