| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0012 00
Table 2. Organizational Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ABS WARNING LIGHT
- Continued
2. ABS WARNING LIGHT
1. Turn prime mover (refer to applicable
DOES NOT COME ON
prime mover TM) ignition switch ON.
2. Count to three and turn OFF ignition
switch. Immediately turn switch ON again.
1. Check intervehicular
3. ABS indicator light still does not
connections for corrosion or
come on.
damage. Repair or replace as
needed.
2. Replace ABS light. Verify
TIRES
problem is solved.
1. Check for proper wheel bearing (rollers)
ABNORMAL TIRE WEAR
Adjust wheel bearings (rollers)
adjustment.
2. Check for worn trunnion bushing.
Replace trunnion bushing
3. Check for loose or defective radius
Tighten or replace radius rods
rods.
4. Check alignment.
Contact Direct Support
Maintenance.
LANDING GEAR
Replace landing leg as
1. Check for misaligned or damaged
1. LANDING GEAR
required (WP 0053 00-1).
landing leg.
DIFFICULT TO RAISE
OR LOWER
Replace landing leg as
2. Check for damaged gearbox.
required (WP 0053 00-1).
Repair landing leg hardware
3. Check for missing crossbar or
crossbar hardware.
Repair landing leg hardware
Check for missing crossbar or crossbar
2. ONLY ONE LANDING
hardware.
LEG RAISES OR
LOWERS
|
||
|
||
