Tweet |
Custom Search
|
|
|
||
TM 9-2330-331-14&P
0019 00
Table 4. Organizational PMCS - Continued
ITEM TO BE
ITEM
MAN
EQUIPMENT
CHECKED OR
PROCEDURE
NO. INTERVAL HOUR
NOT READY/
SERVICED
AVAILABLE IF:
CAUTION
Do not use air or electric
tools to adjust ASAs.
Initial adjusting procedures
start with measurements not
tear-down.
NOTE
This should be checked every
6,000 miles or semiannually,
whichever period is shorter.
Automatic Slack a. Check for any binding, broken, worn
.25
16
Semi-
Binding, wear,
Adjusters (ASAs) or loose parts, missing hardware,
Annually
loose parts,
evidence of an out-of-adjustment
missing hardware,
condition, worn clutch, and release
out-of-adjustment
action.
conditions are
evident.
b. Lubricate according to WP 0022 00-3.
NOTE
This should be checked every
12,000 miles or annually,
whichever period is shorter.
Axles are not in
Check axles for proper alignment
17
Annually
.50
Axles
alignment.
(WP 0071 00-3) . If suspension is
damaged or axles are out of alignment,
notify Direct Support maintenance.
.10
Twist Locks
Lubricate according to WP 0022 00-3.
18
Annually
0019 00-11
|
||