| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0022 00
LUBRICATION INSTRUCTIONS-Continued
6. Clean fittings before lubrication using cleaning compound. Dry before lubricating.
7. The dotted leader lines in Figure 1, WP 0022 00-5, indicate lubrication is required on both sides of the
equipment.
8. Re-lubricate after washing as necessary.
LUBRICATION TYPE/SPECIAL
INSTRUCTIONS/MAINTENANCE
INTERVAL
LUBRICATION
LEVEL ()
POINTS
GAA, When removed from spring clip,
When replaced or removed from
ABS Sensor Body
clean off old grease and apply a new
Spring Clip
light coat on sensor body. Wipe off
excess. (O)
GAA, grease fittings. (O)
Semiannually or every 6,000 miles
Automatic Slack Adjuster
(9.656 km)
OE/HDO-10, clevis pins, oil can
Semiannually or every 6,000 miles
Detail 1
points. (O)
(9.656 km)
OE/HDO-10, hinge/latch, oil can
Semiannually or every 6,000 miles
Stowage Box and
points. (C)
(9,656 km)
Padlocks - Detail 3
GAA, grease fittings. (O)
Annually
Twist Locks (8)
OE/HDO-10, oil can points. (C)
Detail 6
Semiannually or every 6,000 miles
Tiedown Rings
OE/HDO-10, oil can points. (C)
(9,656 km)
Detail 7
Semiannually or every 6,000 miles
Landing Gear Shoes,
OE/HDO-10, oil can points. (C)
(9,656 km)
Swing Pins, and Crank
Handle - Detail 4
Dielectric Grease. Clean and Apply
When disassembled/replaced
All Receptacle Pins
a thin coat. (O)
and Connectors
|
||
|
||
