| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
ENGINE AND PUMP CABINET FRAME REPLACEMENT
THIS WP COVERS:
Removal, Installation, Follow-On Tasks
INITIAL SETUP:
Maintenance Level
Equipment Conditions
Direct and General Support
Semitrailer disconnected from prime mover (refer
to WP 0007 00)
Semitrailer grounded (refer to WP 0007 00)
Materials/Parts
Semitrailer fuel tank drained (refer to WP 0007 00)
Self-locking nuts (2) (item 23, WP 0160 00)
Batteries removed (refer to WP 0053 00)
Self-locking nuts (4) (item 70, WP 0160 00)
Fuel lines disconnected (refer to WP 0103 00)
Self-locking nuts (2) (item 87, WP 0160 00)
Self-locking nuts (2) (item 88, WP 0160 00)
Fuel tank removed (refer to WP 0102 00)
Self-locking nuts (8) (item 89, WP 0160 00)
Two hose tubes loosened at engine cabinet (refer
Self-locking nuts (43) (item 92, WP 0160 00)
to WP 0088 00)
Seals (2) (item 129, WP 0160 00)
Air cleaner and hose removed (refer to
Tools and Special Tools
Alternator removed (refer to WP 0110 00)
Tool kit, general mechanic's (item 4, WP 0156 00)
Muffler plate and muffler removed (refer to
Jack stands (item 3, WP 0156 00)
Optic socket box removed (refer to WP 0048 00)
Static reel removed (refer to WP 0084 00)
Brake interlock valve removed (refer to
REMOVAL
1.
Remove two self-locking nuts (1) and washers (2) from U-bolt (3). Discard self-locking nuts.
NOTE
Secure inlet valve to filter separator.
0142 00-1
|
||
|
||
