TM 9-2330-329-14&P
ENGINE AND PUMP CABINET FRAME REPLACEMENT--Continued
0142 00
2.
Remove four self-locking nuts (12), eight washers (11), and four bolts (10) from side and bottom of
bottom loading support bracket (9). Discard self-locking nuts.
3.
Remove two bolts (5), nuts (4), seal (7), and split coupling (6) at inlet T (8). Discard seal.
4.
Remove two bolts (15), nuts (16), seal (13), and split coupling (14) at top of centrifugal pump (17).
Discard seal.
NOTE
Close all valves and drain fuel from centrifugal pump using
plug at bottom of pump.
0142 00-2