| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
SERVICE AND EMERGENCY COUPLINGS (GLADHANDS) MAINTENANCE
THIS WP COVERS:
Removal, Repair, Installation, Test, Follow-On Task
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Organizational
Tool kit, general mechanic's (item 4, WP 0156 00)
Materials/Parts
Equipment Conditions
Compound, thread sealing (item 7, WP 0159 00)
Semitrailer disconnected from prime mover (refer
Packing rings (2) (item 133, WP 0160 00)
to WP 0007 00)
S-hooks (2) (item 124, WP 0160 00)
Semitrailer grounded (refer to WP 0007 00)
Air reservoir drained (refer to WP 0007 00)
References
REMOVAL
NOTE
There are two gladhands and both are replaced the
same way. This procedure replaces the service
(blue coded) gladhand.
It is not necessary to remove gladhand if only replacing
packing ring.
1.
Remove S-hook (2) from gladhand (3). Discard S-hook.
2.
Disconnect tube (6) from push-lock fitting (4) (refer to WP 0073 00) and remove push-lock fitting
from gladhand (3) at rear of bulkhead.
3.
Remove rear nut (5) from gladhand (3) at rear of bulkhead.
4.
Loosen front nut (1) at front of bulkhead if necessary and remove gladhand (3).
0076 00-1
|
||
|
||
