| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
AIR TUBING AND FITTINGS MAINTENANCE
THIS WP COVERS:
Compression Sleeve Fittings Removal, Cleaning and Inspection, Compression Sleeve Fittings
Installation, Push-In Fittings Removal, Push-In Fittings Installation, Test, Follow-On Task
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Organizational
Tool kit, general mechanic's (item 4, WP 0156 00)
Materials/Parts
Equipment Conditions
Compound, thread sealing (item 7, WP 0159 00)
Semitrailer disconnected from prime mover (refer
Soap (item 12, WP 0159 00)
to WP 0007 00)
Cable ties (AR) (item 98, WP 0160 00)
Semitrailer grounded (refer to WP 0007 00)
Compression sleeves (AR) (item 38, WP 0160 00)
Air reservoir drained (refer to WP 0007 00)
COMPRESSION SLEEVE FITTINGS REMOVAL
NOTE
All compression sleeve fittings are replaced the same
way, only the number of clips varies. This procedure
replaces the fittings and tubing between the Schrader
valve and air reservoir.
1.
Disconnect tube nut (4) and tube (3) from fitting (2) at Schrader valve (1).
2.
Remove compression sleeve (5), insert (6), and tube nut (4) from tubing (3). Discard sleeve.
0073 00-1
|
||
|
||
