| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
NOTE
Make sure left rear bracket assembly is level and does not interfere with the
installation of the hose trough covers.
34. Position left rear bracket assembly (12) on vehicle frame member and clamp in place, as shown.
35. Using a 19/32- inch drill bit, drill two holes, marked G, through vehicle frame member, as shown.
36. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for prime and paint to cure.
4-15
|
||
|
||
