| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
30. Align slider support bracket (3) with scribed mark on center cross brace (4) or rear support bracket (2)
and clamp in place securely.
31. Using a 19/32- inch drill bit and slider support bracket (3) as a template, drill two holes, marked F,
through on center cross brace (4) and rear support bracket (2).
32. Install four flat washers (6), two hexagon head capscrews (17), lockwashers (7), and self-locking nuts (5)
through on center cross brace (4), support bracket (2), and support bracket (3), as shown.
33. Repeat Steps 30 through 32 for left front bracket assembly.
4-14
|
||
|
||
