Tweet |
Custom Search
|
|
|
||
TB 9-2330-337-14
INSTALLATION (continued)
27. Loosen clamps and slide left rear support bracket (2) of center support bracket assembly (1) against frame
plate (14). Tighten clamps.
28. Using 19/32- inch drill bit and frame plate (14) as a template, drill two holes, marked E, through left rear
support bracket (2) of center support bracket assembly (1).
29. Install frame plate (14) on center support bracket assembly (1) with four flat washers (6), two hexagon
head capscrews (8), lockwashers (7), and self-locking nuts (5). Torque self-locking nuts to 55-65 lb-ft
(75-81 Nm).
4-13
|
||