INITIAL INSTALLATION (Cont) - TB-9-2330-330-14-P-10084

Custom Search

Back
INITIAL INSTALLATION (Cont)

Up
TB-9-2330-330-14-P-1 Tanker Ballistic Protectlion System (TBPS/AOA/FTSS) for Semitrailer Fuel Tanker 5000-Gallon Fuel Dispensing Automotive Manual

INITIAL INSTALLATION (Cont)

TB 9-2330-330-14&P-1

INITIAL INSTALLATION (continued)

70. Position front fender panel (51) on front right door frame (44), front panel G (42), and front panel

F (45). Align holes of front fender panel (51) with holes in front right door frame (44) and install

with four flat washers (3), two capscrews (9), and two self-locking nuts. Do not fully tighten

hardware.

71. Install front fender panel (51) on front panel G (42) and front panel F (45) with six flat washers

(3), three capscrews (9), and three self-locking nuts (2). Do not fully tighten hardware.

72. Install front fender panel (51) on tube canister bracket (52) with two flat washers (3), capscrew

(9), and self-locking nut (2). Do not fully tighten hardware.

73. Position center fender panel (53) on front fender panel (51). Align holes of center fender panel

(53) with holes in front fender panel (51) and install with four flat washers (3), two capscrews (9),

and two self-locking nuts (2). Do not fully tighten hardware.

74. Install center fender panel (53) on tube canister bracket (54) with four flat washers (3), two

capscrews (9), and two self-locking nuts (2). Do not fully tighten hardware.

4-26