INITIAL INSTALLATION (Cont) - TB-9-2330-330-14-P-10069

Custom Search

Back
INITIAL INSTALLATION (Cont)

Up
TB-9-2330-330-14-P-1 Tanker Ballistic Protectlion System (TBPS/AOA/FTSS) for Semitrailer Fuel Tanker 5000-Gallon Fuel Dispensing Automotive Manual

INITIAL INSTALLATION (Cont)

TB 9-2330-330-14&P-1

INITIAL INSTALLATION (continued)

14. Extend front bracket (8) to meet front panel D (19) and front panel B (15) and install with four flat

washers (3), two capscrews (20), and two self-locking nuts (2). Do not fully tighten hardware.

15. Position front panel C (21) on front panel B (15), front panel D (19), and rib bracket A center

brace (12). Align holes of front panel C (21) with holes in front panel B (15) and install with eight

flat washers (3), four capscrews (9), and four self-locking nuts (2). Do not fully tighten hardware.

16. Install front panel C (21) on rib bracket A center brace (12) with four flat washers (3), two

capscrews (9), and two self-locking nuts (2). Do not fully tighten hardware.

17. Install front panel B (15) on front panel C (21) with eight flat washers (3), four capscrews (9),

and four self-locking nuts (2). Do not fully tighten hardware.

4-11