INITIAL INSTALLATION (Cont) - TB-9-2330-330-14-P-10070

Custom Search

Back
INITIAL INSTALLATION (Cont)

Up
TB-9-2330-330-14-P-1 Tanker Ballistic Protectlion System (TBPS/AOA/FTSS) for Semitrailer Fuel Tanker 5000-Gallon Fuel Dispensing Automotive Manual

INITIAL INSTALLATION (Cont)

TB 9-2330-330-14&P-1

INITIAL INSTALLATION (continued)

18. Position filter panel E (22) on front panel C (21) and rib bracket A center brace (12). Align holes

of filter panel E (22) with holes in front panel C (21) and install with eight flat washers (3), four

capscrews (9), and four self-locking nuts (2). Do not fully tighten hardware.

19. Align holes of filter panel E (22) with slots of rib bracket A center brace (12) and install with four

flat washers (3), two capscrews (9), and two self-locking nuts (2). Do not fully tighten hardware.

20. Position front fender panel (23) on front panel C (21) and filter panel E (22). Align holes of front

fender panel (23) with holes in front panel C (21) and filter panel E (22) and install with sixteen

flat washers (3), eight capscrews (9) and eight self-locking nuts (2). Do not fully tighten

hardware.

4-12