INITIAL INSTALLATION (Cont) - TB-9-2330-330-14-P-10068

Custom Search

Back
INITIAL INSTALLATION (Cont)

Up
TB-9-2330-330-14-P-1 Tanker Ballistic Protectlion System (TBPS/AOA/FTSS) for Semitrailer Fuel Tanker 5000-Gallon Fuel Dispensing Automotive Manual

INITIAL INSTALLATION (Cont)

TB 9-2330-330-14&P-1

INITIAL INSTALLATION (continued)

NOTE

Ensure front panel B and front panel A are aligned flush and even with the

engine compartment shroud before tightening clamp screws.

12. Align front panel B (15) and front panel A (18) flush with bottom of engine compartment

shroud (10). Tighten two capscrews (17) and two jam nuts (16) to secure front panel B (15) on

engine compartment shroud (10).

13. Position front panel D (19) on front panel B (15). Align holes of front panel D (19) holes in

front panel B (15) and install with four flat washers (3), two capscrews (9), and two self-locking

nuts (2). Do not fully tighten hardware.

4-10