Tweet |
Custom Search
|
|
|
||
TB 9-2330-330-14&P-1
VEHICLE PREPARATION (continued)
NOTE
The two drilled through holes are to reposition the hose tube retaining straps
when installed.
64. Using 19/32 drill bit, drill two holes, marked A, through hose reel housing (124) using front tube
canister bracket (170) and center tube canister bracket (171) as templates, as shown.
65. Install tube canister bracket (172) on engine compartment (28) with four flat washers (163), two
capscrews (162), and two self-locking nuts (165). Torque self-locking nuts to
30-35 lb-ft (41-48 Nm).
3-20
|
||