| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-330-14&P-1
VEHICLE PREPARATION (continued)
58. Install front tube canister bracket (170) on crossmember (139) with four flat washers (167), two
capscrews (168), and two self-locking nuts (166). Do not fully tighten hardware.
59. Install front tube canister bracket (170) on hose reel housing (124) with six flat washers (163),
three capscrews (162), and three self-locking nuts (165). Torque self-locking nuts
to 30-35 lb-ft (41-48 Nm).
60. Torque self-locking nuts (166) to 55-65 lb-ft (71-88 Nm).
61. Install center tube canister bracket (171) on cross member (139) with four flat washers (165),
two capscrews (168), and two self-locking nuts (166). Do not fully tighten hardware.
62. Install center tube canister bracket (171) on hose reel housing (124) with six flat washers (163),
three capscrews (162), and three self-locking nuts (165). Torque self-locking nuts
to 30-35 lb-ft (41-48 Nm).
63. Torque self-locking nuts (166) to 55-65 lb-ft (71-88 Nm).
3-19
|
||
|
||
