| Tweet |
Custom Search
|
|
|
||
 secure
door
assembly
to
body
of
blackout
stoplight
48).
Lift
off
door
assembly.
To
remove
lamp,
push
lamp
in,
turn
counterclockwise,
and
withdraw.
To
install
lamp,
insert lamp
Test lamp
in
socket,
press
in,
and
turn
clockwise
to
lock.
by
turning
on
light
switch
in
towing
vehicle.
Position
door
assembly on body and install two No. 8 x over-head screws.
b. Removal.
(1)
Semitrailer
M270A1
Remove
hex
nut,
hex-
hcad bolt, and lockwasher securing hinged shield to
bracket welded to rear outrigger of body frame. Lower
hinged shield. Disconnect light cable connector. Re-
move
cap
screw
and
lockwasher
which
secure
black-
out stoplight to mounting bracket welded to rear cross
member of chassis frame.
Remove light.
(2)
Semitrailers
M270
and
M269
Remove
hex
nut,
cap
screw,
and
lockwasher
securing
hinged
shield
to
bracket
welded
to
rear
outtrigger
of
body
frame.
Lower shield. Remove light cable connector from clip
Disconnect
connector.
Remove
cap
on
mounting
strap.
screw
and
lockwasher
which
secure
blackout
stoplight
to mounting bracket welded to
rear
cross
member
of
chassis frame. Remove light.
c. Installation.
(1) S e m i t r a i l e r s M 2 7 0 a n d M 2 6 9 . P o s i t i o n
blackout
stop-
light on mounting bracket and secure with 5/16 x 1/2
Connect light
cap screw and 5/16-inch lockwasher.
cable connector.
Press connector into clip on mount-
ing strap.
Raise hinged shield to aline hole in shield
with hole in bracket welded to rear outrigger of body
frame.
Secure shield with 3/8 x 1 cap screw, 3/8-
inch lockwasher, and 3/8-inch hex nut.
(2) Semitrailers
M270A1.
Position blackout stoplight be-
hind
opening
in
rear
cross
member
of
chassis
frame
Secure
and on blackout stoplight mounting bracket.
light to bracket with 5/16 x 1/2 cap screw and 5/16-
inch lockwasher. Connect light cable connector. Raise
hinged shield to aline hole in shield with hole in bracket
welded to rear outrigger of body frame.
Secure shield
with 3/8 x 1 hex-head bolt, 3/8-inch lockwasher, and
3/8-inch
hex
nut.
75. Directional Lights (Semitrailers M270 and M269)
Remove retaining wire which secures
a. Lamp Replacement.
lens and lens gasket on body
of
directional
light
49).
TAGO 1321B
112
|
||
|
||
