Custom Search
 
  
 


in brake drum and secure with remaining 7/16 x 1 hex-head
bolt,
7/16-inch
lockwasher,
and
7/16-inch
hex
nut.
h. Removal of Bearing Cup From Hub. With hub placed on
blocks,
remove
bearing
cup
from
hub,
using
remover
and
re-
placer
41-R-2374-805
39).
Turn
hub
over
and
repeat
the process to remove the opposite cup.
i.  Installation  of  Bearing  Cup  in  Hub.
With hub placed on
a solid surface, position cup over cup seat and install, using
remover  and  replacer  41-R-2374-805  (fig.  39).  Make  certain
Turn
hub
over
and
repeat
procedure
the cup is fully seated.
for
opposite
cup.
Section VI. SUSPENSION
54.
Coordination
with
Ordnance
Maintenance
Unit
Replacement of axle, spring, and/or trunnion cross tube as-
semblies
is
normally
an
ordnance
maintenance
operation,
but
may
be
performed
in
an
emergency
by
the
using
organiza-
tion,
providing
authority
for
performing
this
replacement
is
obtained from the appropriate commander. A replacement axle,
_spring, or trunnion cross tube, and tools needed for the opera-
Figure 39. Installing outer bearing cup using removal and replace
41-R2374-805.
TACO 1321B
86



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business