Appendix C: COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LIST

Custom Search

Back
SECTION III. TOOL AND TEST EQUIPMENT REQUIREMENTS

Up
TM-9-2330-380-14-P Semitrailer Van: Electronic Tactical 12-Ton 4-Wheel XM1063 (NSN 2330-01-224-9244) and M129A4 (NSN 2330-01-372-5642) Manual

Components of End Item

TM 9-2330-380-14&P

APPENDIX C

COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LIST

Section I. INTRODUCTION

C-1. Scope

This appendix lists Components of End Item (COEI) and Basic Issue Items (BII) for the XM1063 and

M129A4semitrailers.

C-2. General

The Components of End Item (COEI) and Basic Issue Items (BII) lists are divided into the following

sections:

a. Section II: Components of End Item. This listing is for informational purposes only and

is not authority to requisition replacements. These items are part of the end item, but are

removed and separately packaged for transportation and shipment. As part of the end

item, these items must be with the end item whenever it is issued or transferred between

property accounts. Illustrations are provided to assist you in identifying the items.

b. Section III: Basic Issue Items. These are the minimum essential items required to place

the semitrailer in operation, to operate it and to perform emergency repairs. Although

shipped separately packaged, BII must be with the semitrailer during operation and

whenever it is transferred between property accounts. The illustrations will assist you in

identifying the BII. This manual is your authority to request/requisition replacement BII,

based on TOE/MTOE authorization of the end item.

C-3. Explanation of Columns

Thefollowingprovidesanexplanationofcolumnsfoundinthetabularlistings:

a. Column (1): Illustration Number (Illus Number). This column indicates the number of the

illustration in which the item is shown.

b. Column (2): National Stock Number. Indicates the National Stock Number (NSN) assigned

to the item and will be used for requisitioning purposes.

c. Column (3): Description. Indicates the federal item name and, if required, a minimum

description to identify and locate the item. The last line for each item indicates the CAGE (in

parentheses) followed by the part number. If the item needed differs for different models of the

equipment, the model is shown under the Usable On Code heading in this column. XM1063 UOC

is MEE. M129A4 UOC is JNH.

d. Column (4): Unit of Measure (U/M). Indicates the measure used in performing the actual

operation/maintenance function. This measure is expressed by a two-character alphabetical

abbreviation (e.g., ea., in., pr.).

e. Column (5): Quantity required (Qty rqr). Indicates the quantity of the item authorized to be

used with/on the equipment.

C-1