| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-380-14&P
This task covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
General mechanic's tool kit (item 01, Appendix B)
Power source disconnected.
Materials/Supplies:
WARNING
Make sure all electrical power is disconnected before performing any maintenance on the electrical
system. Serious injury or death may result if proper precautions are not taken.
a. Removal
CAUTION
Gasket is easily damaged. Use care when removing cover.
1
1. Remove four screws (1) and cover with gasket (2).
2. Remove bolt (3) and retaining strap (4).
3. Remove wire nut (5) securing ground wires (6) (green
to green).
4. Tag and disconnect wires (7 and 8) from capacitors (9
2
and 10).
5. Loosen bondnut (11) and grommet (12) and pull wire
(7) through top of box.
7
11,12
8
6
4
5
9
6
3
10
|
||
|
||
