| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0071 00
FRONT AND REAR AXLE REPLACEMENT
AXLE ALIGNMENT
NOTE
Ensure that semitrailer is unloaded and level from side to side and from
front to rear.
Install radius rods per WP 0057 00-2.
1. Measure distances "A" and "B" from kingpin to axle spindles. Measurements should be within
1/8 in. (3.2 mm) of each other.
2. Measure distances "C" and "D" between axle spindles. Measurements should be within 1/8 in.
(3.2 mm) of each other.
3. Measure distances "E" and "F" between axle spindles. Measurements should be within 1/8 in.
(3.2 mm) of each other.
NOTE
Perform step 4 if improper measurements were obtained In steps 1 through 3.
4. Loosen two nuts (17) on radius rod (18) and turn radius rod to adjust. Ensure that nuts are
tightened when alignment is obtained.
5. If true alignment cannot be obtained, inspect and replace worn or bent suspension parts,
6. Install outer wheels (WP 0016 00-3).
18
17
17
Figure 2. Axle Alignment
END OF WORK PACKAGE
0071 00-3/4 Blank
|
||
|
||
