| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0038 00
AUTOMATIC SLACK ADJUSTERS REPLACEMENT - Continued
REMOVAL
1. Rotate slack adjuster manual adjustment hex (10) counterclockwise until straight pin (3) becomes loose in
slack adjuster yoke (universal joint vehicular) (2).
NOTE
More torque is required to rotate slack adjuster manual adjustment hex
counterclockwise than is necessary to rotate it clockwise. Torque may be as
high as 70 lb-ft (94.9 Nm).
2
1
3
11
4
10
7
9
8
6
5
Figure 1. Slack Adjuster Assembly
2. Remove cotter pin (1) from straight pin (3) and remove straight pin (3) from slack adjuster (4). Discard
cotter pin.
3. Remove nut (8) and bolt (7) from mounting bracket (9).
|
||
|
||
