| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0034 00
SERVICE BRAKES - SHOES AND LINING MAINTENANCE - Continued
Figure 1. Service Brake
REMOVAL
WARNING
There is a lot of tension on brake springs. Caution must be used while
removing all components to avoid injury.
1. Rotate slack adjuster manual adjustment hex counterclockwise until pin becomes loose in slack
adjuster.
2. Remove rollers (7) and clips (6).
3. Remove spring (1) from S-cam side of brake shoe assembly (2).
4. Remove brake shoe assembly (2).
5. Remove springs (3) from opposite side of brake shoe assembly (2).
6. Remove shoulder pins (5), and bushings (4).
7. Clean and lube rollers (7), pins (5), and bushings (4) per WP 0022 00-4.
|
||
|
||
