| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
12-VOLT ELECTRICAL RECEPTACLE REPLACEMENT
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Ground Boards Emplaced
Two Locknuts (WP 0080 00-5)
Landing Legs Down
Dielectric Grease (WP 0086 00-4)
Tires Chocked
Semitrailer Disconnected from Prime Mover
Prime Mover Electrical Connector
Disconnected from Semitrailer
Tools/Test Equipment
General Mechanic'sTool Kit (WP 0077 00-9)
REMOVAL
WARNING
When repairing an electrical malfunction, ALWAYS disconnect towing
vehicle electrical connector from semitrailer. Failure to do so may
result in serious injury or death due to electric shock.
1. Unplug main wiring harness from 12-volt electrical receptacle harness (3).
2. Remove two locknuts (1), washers (2), screws (4), and 12-volt electrical receptacle harness (3) from
front of trailer (5). Discard Iocknuts.
1
2
5
3
4
Figure 1. 12-Volt Electrical Receptacle
|
||
|
||
