| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0015 00
Table 3. Operator/Crew PMCS - Continued
ITEM TO BE
ITEM
MAN
EQUIPMENT
CHECKED OR
PROCEDURE
NO. INTERVAL HOUR
NOT READY/
SERVICED
AVAILABLE IF:
NOTE
If ABS warning light stays on
during mission, continue on with
mission until system can be
properly diagnosed by
Organizational Maintenance.
Braking capacity will be no
modulation at wheel or wheels
that have a fault.
Trailer is not NMC if during
mission ABS is inoperable and
there is no time to diagnose
problem(s).
During blackout mode condi-
tions, place mud or tape over
ABS warning light.
Do not remove or otherwise
disable light.
During
ABS Warning
Check ABS warning light for constant
.10
18
Light
operation.
During
Axles and
Unusual noises,
Listen for unusual noises, which are
N/A
19
Suspension
semitrailer
indications of possible problems. Be
wanders, pulls to
alert to conditions such as side pull,
either side, or does
wandering, tracking of semitrailer, and
not track.
load shift.
During
Unsafe conditions
General
Be alert to all conditions that may
N/A
20
are identified.
indicate unsafe operation or improperly
secured cargo. Ensure all prime mover
TM procedures are adhered to for safe
operation i.e., coupling load limits,
speeds, and fifth wheel settings for
on/off operation.
|
||
|
||
