| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0015 00
Table 3. Operator/Crew PMCS - Continued
ITEM TO BE
ITEM
MAN
EQUIPMENT
CHECKED OR
PROCEDURE
NO. INTERVAL HOUR
NOT READY/
SERVICED
AVAILABLE IF:
.25
Before
Lights
Lights are
a. Connect 12-volt intervehicular cable
5
damaged, do not
from tractor to semitrailer. Check lights
operate, or missing
for damage, proper operation, and
hardware.
missing hardware.
NOTE
Remove 12-volt cable before
beginning step b.
b. Connect 24-volt intervehicular cable
Lights are
from tractor to semitrailer. Check lights
damaged, do not
for damage, proper operation, and
operate, or missing
missing hardware.
hardware.
6
Look for damage and missing hardware.
Before
.10
Reflectors are
missing and
NOTE
required for
mission.
Tractor must be coupled
before checking ABS warning
light.
ABS warning light should
not stay on when semitrailer
is moving above 4 mph
(6.4 km/h).
If mission requirements do
not allow for troubleshooting of
ABS system, continue on
with mission until system can
be properly diagnosed by
Organizational Maintenance.
Only modulation will be
affected, not stopping
capacity of brake system.
Visually check that the ABS warning light ABS light does not
ABS
7
Before
.10
come on or stays
does not stay on.
on.
|
||
|
||
