| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
ENGINE OIL COOLER REPLACEMENT--Continued
0146 00
3.
Remove two nuts (9), lockwashers (10), washers (11), screws (12), and oil cooler (2) from
bracket (5). Discard lockwashers.
4.
Remove guard (6) from oil cooler (2).
5.
Remove three screws (7) and bracket (5) from engine (8).
INSTALLATION
1.
Install bracket (5) and three screws (7) to engine (8).
2.
Install guard (6) to oil cooler (2).
3.
Install oil cooler (2), two screws (12), washers (11), new lockwashers (10), and nuts (9) to
bracket (5).
4.
Install oil supply line (1) and return line (3) to oil cooler (2).
5.
Install new cable tie (4) to oil supply line (1) and return line (3).
FOLLOW-ON TASKS
1.
Install engine shroud (WP 0148 00).
2.
Add engine oil as necessary (WP 0044 00).
3.
Disconnect semitrailer grounding cables (WP 0007 00).
END OF TASK
0146 00-2
|
||
|
||
