TM 9-2330-330-14&P
FILTER/SEPARATOR FILTER ELEMENTS MAINTENANCE--Continued
0125 00
DISASSEMBLY
1.
Remove gasket (26), adapter (25), gasket (24), go-no go fuse mounting plate (23), gasket (22),
three go-no go fuses (20), and fuse bracket (21) from filter assembly (16). Discard gaskets and
go-no go fuses IAW local HAZMAT Procedures. Clean and replace filter assembly (16) if
damaged.
2.
Repeat step 1 for four remaining filter assemblies (16).
NOTE
Step 3 is not required if full assembly is being reused.
3.
Remove nut (28), lockwasher (29), washer (30), guide bar (27), washer (31), and bolt (32) from
retaining plate (10). Discard lockwasher.
FILTER/SEPARATOR FILTER ELEMENTS MAINTENANCE--Continued
0125 00-4