| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
WATER DETECTION SWITCH AND HARNESS MAINTENANCE--Continued
0060 00
8.
Remove 8 screws (16), lock washers (17), sump plate (18), and gasket (19) from filter
separator (20). Discard lock washers and gasket.
9.
Remove water detection switch (11).
INSPECTION
Inspect wires for cracks, fraying or exposed insulation and loose or damaged connectors. If any of these
conditions exist, repair per WP 0065 00.
INSTALLATION
NOTE
Use thread sealing compound on screw threads.
1.
Install water detection switch (11) on sump plate (18).
2.
Install new gasket (19), sump plate (18), 8 new lock washers (17), and 8 screws (16).
3.
From junction box (8) thread two wires (4) through conduit (15) leading to water level warning
indicator light (5) at control panel (3).
4.
From junction box (8) thread two wires (12) through conduit (14) leading to water detection
switch (11).
0060 00-4
|
||
|
||
