Tweet |
Custom Search
|
|
|
||
TM 9-2330-330-14&P
ORGANIZATIONAL PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)--Continued
0043 00
Table 1. Organizational PMCS--Continued.
PROCEDURE
NOT FULLY
ITEM NO.
INTERVAL
ITEM TO BE
MISSION
INSPECTED
CAPABLE IF:
5
Semiannual
Landing Gear
Check condition and operation of
landing gear. Inspect for damage
or wear. Replace damaged parts
(refer to WP 0084 00).
6
Semiannual
Bogie Assembly
a.
Position semitrailer on hard
level surface with front
resting on landing gear.
Jack and block frame.
Remove wheel assemblies
(refer to WP 0007 00).
NOTE
Clean axle and suspension
system with water and fiber
brush to allow for careful
inspection.
Any cracks or
b.
Inspect general condition of
damage are
trunnion tube, axles, and
evident.
leaf springs. Look for cracks
or damage. If cracked or
damaged, notify Direct
Support maintenance.
c.
Check tightness of U-bolts
Any damage or
and clips on leaf springs.
wear is evident.
Tighten loose U-bolts and
clips. If damage or wear is
evident, notify Direct
Support maintenance.
d.
Check tightness of U-bolts
Any damage or
and screws on leaf spring
wear is evident.
cap and seat. Tighten loose
U-bolts and screws. If
damage or wear is evident,
notify Direct Support
maintenance.
0043 00-5
|
||