| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
INTRODUCTION
GENERAL
This WP provides information on the malfunction/symptom index and procedures of Operator
troubleshooting.
MALFUNCTION/SYMPTOM INDEX (WP 0010 00)
The malfunction/symptom index is a quick reference index for finding troubleshooting procedures.
Associated with each symptom name is a WP sequence number representing the starting point in a
troubleshooting sequence.
TROUBLESHOOTING PROCEDURES (WP 0011 00 thru WP 0016 00)
The troubleshooting WPs contain tables listing the malfunctions, tests or inspections, and corrective
actions required to return the M969A3 to normal operation. Perform the steps in the order in which they
appear in the tables.
The columns are defined as follows:
1.
MALFUNCTION--A visual or operational indication that something is wrong with the M969A3.
2.
TEST OR INSPECTION--A procedure to isolate the problem in a component or system.
3.
CORRECTIVE ACTION--A procedure to correct the problem.
If you are unsure of the location of an item mentioned in troubleshooting, refer to WP 0002 00 or to the
maintenance task where the item is replaced.
Before performing troubleshooting, read and follow all safety instructions found in the warning summary
at the front of this manual.
This manual cannot list all of the malfunctions that may occur, nor all tests or inspections and corrective
actions. If a malfunction is not listed, or is not corrected by the listed corrective actions, notify your
supervisor.
END OF TASK
0009 00-1/2 blank
|
||
|
||
