| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
WARNING
Wheel assembly is heavy. Use two people to remove
wheel assembly from studs. Failure to follow this warning
could result in injury to personnel.
2.
Raise axle so wheel assembly (1) is off ground.
3.
Remove 10 nuts (2).
4.
Remove wheel assembly (1).
OPERATION UNDER USUAL CONDITIONS--Continued
Installation
WARNING
Wheel is heavy. Use two people to install wheel
to studs. Failure to follow this warning could result
in injury to personnel.
NOTE
Before installing spare wheel, be sure that mounting
surfaces of hub and flat mounting surfaces of wheel
are clean and free of foreign matter or excess paint.
Check to see that threads of studs are clean and
not damaged.
1.
Raise axle high enough so that wheel assembly (1) can be mounted.
2.
Install wheel assembly (1).
3
Install 10 nuts (2) fingertight.
4.
Lower wheel assembly (1) to ground.
0007 00-38
|
||
|
||
