Custom Search
 
  
 


TM 9-2330-329-14&P
EMERGENCY VALVE MAINTENANCE--Continued
0119 00
7.
Install new gasket (21) and pilot valve (22) in bonnet (6).
NOTE
Step 9 is only required if plug was removed.
8.
Install new gasket (21) and plug (25).
NOTE
Step 10 is not required unless screen was removed.
9.
Install screen (20), nuts (18), and screws (19).
CAUTION
Seal must be installed with the seal flange toward the valve body to avoid leakage.
10.
Install new seal (13) and o-ring (12) in body (15).
11.
Install new quad-ring (3) and new wipe ring (2) on bonnet (6).
12.
Hold spring pin while screwing housing (1) onto bonnet (6).
13.
Install new o-ring (7) in bonnet (6).
CAUTION
Do NOT drop piston while installing it.
14.
Install spring (10) and piston (11).
15.
Hold spring pin (9) and attach rod (14).
16.
Rotate the bonnet (6) slightly in either direction and push it on the body (15).
17.
Install six screws (4) and washers (5) on the bonnet (6).
0119 00-9



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business