| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
FUEL SYSTEM TROUBLESHOOTING
THIS WP COVERS:
Fuel System Troubleshooting
INITIAL SETUP:
Maintenance Level
References
Operator/Crew
To troubleshoot the M967A2 fuel system, perform the test/inspections and corrective actions provided in
Table 1.
Table 1. Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
FUEL DOES NOT FLOW
1.
Verify fuel is in tank.
If tank has fuel, go to step 2. If
DURING ANY FUEL
tank has no fuel, fill tanker. Verify
SERVICING OPERATION
problem is solved.
2.
Verify all valves are set per
Set valves per schematic on tool
fuel operations schematic
box lid (refer to WP 0007 00). If
on tool box lid (refer to
valves are already set per fuel
operations schematic, go to
step 3.
3.
Check pump strainer for
Clean strainer (refer to WP 0039
debris or dirt clogging inlet.
screen was not clogged, go to
step 4.
4.
Verify emergency valve A
If valve is not in open position,
control handle is in open
open valve. Verify problem is
position.
solved. If valve is already open,
notify Organizational
maintenance that further
troubleshooting is required.
END OF TASK
|
||
|
||
