| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
This Task Covers:
a. Removal
b. Installation
c. Follow-On Tasks
Initial Setup:
Tools and Special Tools:
Tool kit, general mechanic's (Item 4, Appendix B-3)
Equipment Conditions:
Landing legs down
Semitrailer disconnected from prime mover
Tires chocked
WARNING
When removing or installing ground boards keep your fingers and
thumbs clear of bracket to prevent injury.
NOTE
There are two ground boards and they are removed and installed
the same way. This procedure covers one ground board.
General Procedure:
a. Removal.
1.
Remove two cotter pins (1), washers (2), and pin (3) from semitrailer bracket. Discard cotter pins.
2.
Remove clip (4) and chain link (5) from chain and remove ground board (6) from semitrailer.
|
||
|
||
