| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
b. Installation.
1. Install taillight (1) with three new self-tapping screws (2). Use a light coat of antiseize compound
on screws.
2. Connect ground wire to taillight.
3. Connect taillight connector to wiring harness connector behind bulkhead. Use dielectric grease
on pins.
c.
Follow -On Tasks.
1. Connect semitrailer to prime mover.
2. Raise landing legs.
3. Remove/store chocks and ground boards.
4. Connect power source and check to see if operational.
6-12
|
||
|
||
