| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
b. Installation.
1.
Apply antiseize compound to self-tapping screws. Install clearance light (1 or 2) and three new self-
tapping screws (3).
2.
Connect wiring harness connector to clearance light connector behind bulkhead. Apply dielectric
grease to wiring harness pins.
c.
Follow -On Tasks.
1.
Connect semitrailer to prime mover.
2.
Raise landing legs.
3.
Connect power source and check to see if operational.
6-10
|
||
|
||
