| Tweet |
Custom Search
|
|
|
||
 TM 9-2320-279-10-3
Troubleshooting Index (Cont)
3-16. TROUBLESHOOTING MALFUNCTIONS (CONT).
Table 3-5.
Troubleshooting
Malfunction
Test or Inspection
Corrective Action
1. 120 VAC RECEPTACLES DO NOT OPERATE (CONT).
CIRCUIT BREAKER 7
CIRCUIT BREAKER 9
408
CIRCUIT
BREAKER 16
CIRCUIT
CIRCUIT
BREAKER 8
BREAKER 10
2 AND 4
Step 5. If driver side rear receptacles do not operate: Check if circuit
breaker 9 is tripped.
If circuit breaker 9 is tripped, reset circuit breaker. If
circuit breaker trips again, notify Supervisor.
Step 6. If passenger rear receptacles do not operate: Check if circuit
breaker 10 is tripped.
If circuit breaker 10 is tripped, reset circuit breaker. If
circuit breaker trips again, notify Supervisor.
Step 7. If reciprocating saw charger receptacles do not operate: Check
if circuit breaker 16 is tripped.
If circuit breaker 16 is tripped, reset circuit breaker. If
circuit breaker trips again, notify Supervisor.
Step 8.
If problem still exists, notify Supervisor.
2. SHORELINE RECEPTACLE DOES NOT EJECT POWER CORD
WHEN VEHICLE ENGINE IS STARTED.
Step 1.
Check if correct power cord is being used.
If correct power cord is not being used, replace cord.
Step 2.
If problem still exists, notify Supervisor.
|
||
|
||
