TM 9-2320-279-10-3
Operation Under Usual Conditions (Cont)
TFFT00885p
8
5
3
6
7
4
1
2
NOTE
PRESSURE GOVERNOR will check for valid pressure
transducer signal at power up.
a. Push MODE switch (1) on desired instrument panel.
b. MESSAGE CENTER (2) should display MODE.
NOTE
Pressure (PSI) is the default mode of operation.
c. If desired, push MODE switch (1) to change to RPM mode. Indicator
light (3) will come on. Press MODE switch (1) again to return to PRESSURE
mode. Indicator light (4) will come on.
NOTE
PRESET switches are set individually for each control panel
and only operate in the PRESSURE mode.
d. Push PRESET switch (5) to set the PRESSURE GOVERNOR to the
programmed pressure.