TM 5-4240-536-10
0005 00
(2) Run one of the anchor lanyards out to a softer area at a 45 degree angle (approx.). Insert an anchor peg into one
of the three pre-sewn anchor peg loops on the anchor lanyard. Using hands, push anchor peg into ground ensur-
ing loop is securely under the anchor peg hooks on the top of the anchor peg. DO NOT hammer in or force in too
deeply. Repeat at other side of net.
4.
Clip a deployment lanyard to the buckle at the end of the two red deployment handles on the net device.
0005 00-9