|
|
|
|
|
TM 10-6640-238-13
4-110
4.
Install RVP Bath. See Figure 4-38.
WARNING
Two people are required to install RVP bath because of its weight. Failure to
comply with this warning could result in serious injury to personnel or damage to
equipment.
a.
Lift RVP bath (4) into position on countertop (5). Plug RVP bath power cord into convenience outlet and lower
RVP bath into place.
b.
Align RVP bath on countertop (5) and secure with four screws (3).
c.
Connect RVP bath drain (1) with hose clamp (2).
d.
At Main Power Panel place circuit breaker A1CB16 to ON.
e.
Run an operational check to test RVP bath system.
|
|
|
|
|
Privacy Statement -
Copyright Information. -
Contact Us
