TM 10-6640-238-13
3-27
c.
Storage Site Selection. Inside storage is preferred for items selected for administrative storage. If inside storage is
not available, the sites selected should provide required protection from the elements and allow access for visual
inspection when applicable.
d.
Preparation for Shipment. Prior to shipment all overpack containers (and their contents) and spill kit shall be
secured inside Mod Lab A in accordance with Figure 3-6. Each group of containers is secured using a supplied
2-piece frame and strapping. Two straps are used to secure the 2-piece frame to the overpack boxes. A third strap is
used to secure the 2-piece frame and overpack box group to the trailer tie down rings located along the laboratory
aisle floor. Boxes 1 thru 16 are large overpack boxes, 17, 18, and 24 are medium sized boxes, and 19 thru 23, and
25 are small overpack boxes. Starting with the front of the trailer the overpack boxes are installed in groups as
follows: Boxes 18, 22, 23, and 25, 8, 9, and 14, 11 thru 13, 10, 17, and 19, 2, 15, and 16, 1, 3, and 7, 4 thru 6, and
20, 21, and 24.
e.
Air Shipment. Chemicals must be stored in original or same as cardboard boxes when received so that movement in
overpack boxes is minimized to maximum extent. Only unopened chemicals can be packed for air shipment.
|
|
